1. How did you make your predictions?
2. When you tested the circuits, did any of the results surprise you?
3. Why did letter "E" not work? This was the picture that had the motor with both wires touching one end of the battery (either the positive or negative side.)
4. Why did people get different results for "C"? Letter "C" had the picture with wires going from the bulb, but one wire was going to the positive side of the battery and the other wire was touching the SIDE of the battery.
1. I made my predictions by using my background knowledge. Most of the pictures I had already experienced,so I knew if it would work or not. For some of them I used my knowledge about electricity. For example, on letter E I knew it was wrong because to make a complete circuit you need to have contact on both the negative and positive side of the battery.
ReplyDelete2.None of the results surprised me because most of the pictures I had already experienced. The only ones I had not experienced are C and E. For C I knew it was wrong because the wire connected to the side. The side of the battery has plastic on it,and plastic is an insulator which means it blocks electricity,so it cannot work. For E I knew it was wrong because there was not an even amount of positive and negative electricity, so it could not make a complete circuit.
3.Letter E did not work because it did not have contact on the negative and positive side of the battery. It only had contact on one of the sides.Without an even amount of positive and negative energy you have an incomplete circuit,so letter E could not work.
4.People got different results for C because some of the batteries did not have plastic on the sides. Instead, they had metal. Plastic is an insulator which blocks electricity,and metal is a conductor which is something that can lead electricity.For the people with plastic it did not work,but for the people with metal it did.
how did you make your predictons?
ReplyDeleteI looked for all the contacks that are; negitive and positive flow that have a conducter. Once the circuit works you have a closed circuit if it does not work it is open.
NY
1. How did you make your predictions?
ReplyDeleteI made my predictions by my experience. Outside of school I go to an electronics class. There I learned about + and -, filaments, circuits, and snap kits.
2.Did any of the results surprise you? Why? Why not?
Yes! on the letter C some of the batteries worked and some didn't. The ones that worked had no plastic so it was metal and it had a charge. The ones that did not work had plastic onit and had no charge.
3. Use science language to explain why
did any of the results suprize you?
ReplyDeleteno I was not wrong. I looked at the flow and saw if the flow was right. I was not suprized.
NY
This comment has been removed by the author.
ReplyDeletewhy did e not work?
ReplyDeletee did not work because it did not have negitive and positive flow it just hade negittive flow.
NY
1 I made my predictions by looking at
ReplyDeletethe pictures,and seeing which ones were
open on those ones I put no.then,I looked at the remaining ones to see if they were connected to the contacts if not I put no if they were I put yes
H.S.
2
ReplyDeleteNo because I knew which ones would light and which ones wouldn't.I knew because some weren't connected to their contacts and some were
H.S.
why did c get differnt results?
ReplyDeletebecause some battrys had plastick that surved as a insolater.
NY
3
ReplyDeleteE didn't work because it was only connected to positive, and to make a loop or closed circuit it needed to be connected to both negative and positive.
H.S.
NY, GS and HS.... Your comments are very thorough and well thought out. Fantastic!
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteWhen you tested the circuits,did any of the results surprise you?
ReplyDeleteYES!E surprised me because i predicted that E will work and it did work.
4
ReplyDeleteplastic is an insulator so it didn't light, but for some people it did because their was no plastic on their battery so it was just metal and it made a complete circuit.
H.S.
1. I made my predictions by looking at the picturs and I wrote yes or no because I tried the circut set-ups and I knew if they were not always right.
ReplyDelete2. None of the results surprized me because I all ready tried them.
3. "E" did not work because the wires only touched the positive or the negative.
4. People got different results for "C" because some batterys had the insolator off.
M.M.B
1 how did you make your predictions?
ReplyDeleteI made my predictions by my experience because some of the experiments we did I had already done.
2 when you tested the circuits did any of the results surprise you?
None of the results surprised me because I did most of the things that we did in our electricity unit at my house so I knew what was coming.
3 Why did letter E not work?
E did not work because both wires need to be hooked up to the sides (negative and positive)
the wires cant make contact if one side is not touching then the circuit wont work.
4 Why did people get different results for letter c?
People got different results for C because one battery had no paper on the sides.The battery is all metal so the wires can make contact with the battery so the circuit can work.
N.B.
This comment has been removed by the author.
ReplyDeleteWill It Work-Predictions
ReplyDeleteQuestion #1: How did you make your predictions?
Answer #1: I made my predictions by knowing that I have already expierenced the expierements, so I know if they worked or not. The way I knew to say no was by knowing that I haven't done the expierements.
Question #2: Did any of the results suprise you? Why? or Why not?
Answer#2: Expierement "e" suprised me because my science group tryed it and it didn't work. Then we tryed it with a unwrapped battery and it worked.
Question #3: Use science language to explain why "E" did not work.
Answer #3: "E" did not work because the wires were not connecting to the positive and the negative side of the battery.
Question #4: Why did people get different results for "C"?
Answer #4: People got different results for "C" because a lot of the batteries were insulated. the ones that weren't insulated worked. The one that were insulated did not work.
-H.C.
When you tested the circuits, did any of the results surprise you?
ReplyDeleteyes something did surprised me when we put a wire on one side and another side and the light bulb on top it did not work.
I made my perdictions by studying energy flow.
ReplyDeletesome of the results suprised me.
there wasent a flow so the energy couldent produse.
some of the batterys did not have a wrap.
1.I made my predictions by useing my common sence and useing my schema from other tests.
ReplyDeletei didn't finish
Will It Work perdicions... 1. I made my perdictions by looking at the pictures of the circuits. I said NO to the ones that looked like open circuits and I said YES to the ones that looked like closed circuits. 2. None of the results suprised me because I knew that some of them would be confusing. I knew what an open circit was ans what a closed circuit was. 3. "E" did not work because both of the wires wre on the positive side,and it did not make a complete circuit because a complete circuit needs to have one wire on the positive side and the other wire on the negitive side. 4. People got different results for "C" because some people had a D battery that was an insolator,and some people had a D battery that had an conducter. Thats why It did not work for SOME people. M.J.
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteWill It Work-Predictions
ReplyDeleteQuestion #1: How did you make your predictions?
Answer #1: I made my predictions by looking at the pictures and using my memory of these worked or if they didn't.
Answer #2: Letter "C" surprised me because we tried it and the first time it didn't work, but the second time Mr. Lewis did it it worked.
Answer #3: "E" did not work because when the battery and the wire does not connect with electricity none of it worked.
Answer #4: Why people got different results were because some of the batteries were different and some were not. So some lightbulbs light and some did not.
Question #5: How were the batteries different?
Answer #5: They were different because some had plastic and some didn't.
-J.T.
How were the batteries different
I made perditions about my back round knowlege. most of the picturs i knew on letter e i was right becaues i knew that i needed a posetive side and a negtive side.
ReplyDeletesandis seale
how did you make your predictions?
ReplyDeletei looked at all of the systems and wrote yes if all the contacts were touching and no if they weren't.
did any of the results surprise you?why or why not?
none of the results surprised me because i kind of thought that all of the awnsers so none surprised me.
cicuit e didn't work because it was an open circuit and all contacts were not touching.
people got different results for c because some batteries lost there insalator and the curent could go through the batterey.
How did you make your predictions? I tested the experiments on the record page. Did any of the results surprise you? No because we did the experiments before we got the record sheet. Use science language why E didn't work. The wires are both touching one side of the battery. The wires need to be touching both sides of the battery. Why did people get different results for C? One wire is touching the side of the battery and the plastic covering on the battery forms an insulator. TK
ReplyDelete1. I made my predictions by brainstorming things I know of electricity. Now using my knoledge of the experament I come up with an explanation. 2. No resaults surprised me. Actually, all my predictions were right. 3. "E" didn't work because it was only connected to the posstive side of the battery. M.A.B.
ReplyDeleteI predict that A will,B will not,C did but i predicted no,D is ok,E was hard but it`s ok,and F,OWESOME.
ReplyDeleteMP
1. How did you make your prediction?
ReplyDeleteI made my prediction by...
looking at the experaments that we all ready did. Like the one that had the wiretouching the posative side of the battery then the other side of the wire touching the bottem of the light bulb.
2. Did any of the results suprise you? Why? Why not?
No! Because I know that all of the experaments have to have a posative and negative flow . If they don't the light bulb won't light
3. Use science languege to explaine why ''E'' did not work.
''E'' did not work because ''E''did not have a posative and negative flow it just had a posative flow so the light bulb did not work.
4. Why did people get different resaults for ''c''?
well some of the batterys had a insolater A.K.A the plastic cover over the battery, and some of the batterys we had did not have a plastic cover over it.
The last comet was I.D.S's
ReplyDelete3.
ReplyDeleteE did work because the two wires are at the positive side to make it WORK.
MP
I made my predictions by using my schema and common scence.
ReplyDeleteNo.They didn't because there has to be an even flow of negitive and positive energy.
Circuit E didn't because it didn't have an even flow of positve and negitive energy.
The results were diffrent because some people had isolaters and some didn't.
4.
ReplyDeleteC did work because 1 part of the wire has to tuch 1 side of the battery and a nother one at a nother place of the battery.
1.I comepaered exsperimints together.
ReplyDelete2.no!
3.it bib not have energy from both sibes of the battery.
4.some of the batterysdident have plastik.
1. I made my predictions by using my background knowledge.The way I used my background knowledge was by that we already did some of the experiments before we made our predictions.Another way I made my predictions is because after experiments we talked about why or why the experiments didn't work.
ReplyDelete2. No,None of the results surprised me because I knew what the results would show.I knew that the wires needed both positive and negitive energy running through them.Some of the photos didn't have negitive and positive energy flowing through them.Some of the photos did.
Sorry I ran out of time.
E.A.C.
1.How did you make your prdictions?I made my predictions by using of what I already know.For example to light a light a light-bulb you have to have ca wire,and a battery.-I did not get enough time to finish.
ReplyDelete-S.w
1. I made my prediction by checkin over all of them and I also used my schema and memory.
ReplyDelete2. Was there anything that surprised you? No. Because every one worked except one.
3. The circuit was incomplete. E did not work because it was incomplete.
4. C worked because the wrapper was off.
ALG
Will it work predictions
ReplyDelete1. I made a prediction by making sure bolth ends of the wire were touching the positive and the negitive side were touching the batterie and there were no loose ends. I could also just hook it up and see if it lights up!
2. Well the answer did not suprise me at all because my predictions were right!
3. I think E did not work because it was only going though one side of the battrie so the circuit was incomplete!
This comment has been removed by the author.
ReplyDeletewill it work?
ReplyDeleteThis comment has been removed by the author.
ReplyDelete1. I made my predictions by checking that the wires were touching the positive and negitive sides of the battery. I also made sure that all four connections were made.
ReplyDelete2.The one that suprised me was number C because some groups got it to work ansd some didn't. the groups that got the bulb to light up had a battery with no rapper. The rapper is called a insulator.
JBS
Will it work - predictions
ReplyDeleteJGN
Will It Work !
ReplyDelete1. I made my prediction by check to see if all 4 sides are touching.i'm not done yet
This comment has been removed by the author.
ReplyDeleteWill it Work!
ReplyDeleteHow did I make my predictions?
I made my predictions by using my backround knowledge and schema. I did the experiments, but not all of them just some. Most of them I knew worked or didn't.
Did any of the results surprise you?
One of them surprised me. It was letter C because on the battery that had plastic did not light up, but the ones that didn't have plastic did light up. That surprised me a lot.
Use science language to explain why "E" did not work.
It was a closed circuit because one of the wires did not touch the sides of the battery, so it was an incomplete circuit.
Why did the people get different answers for letter C.
People got different answers because some batteries had plastic, so the energy didn't flow through.Some didn't have plastic, so the energy flowed through.
LC
1.how did you make your predictions?well I wold know if some could be both positive or both are -
ReplyDelete2. why did E not work?E did not work because both of the sides are -
3.why did people get different results for C? people got different results because one had plastic and one did not.
#1:I made my predictions by using my schema.
ReplyDelete#2:None of the results surprised me.
#3:The wires were only the - or +.
#4:One of the batteries had no insulator.
MHB
1. I made my predictions by checking that the wires were touching the positive and negitive sides of the battery. I also made sure that all four connections were made.
ReplyDelete2.The one that suprised me was number C because some groups got it to work ansd some didn't. the groups that got the bulb to light up had a battery with no rapper. The rapper is called a insulator. The insulator stops the electricity from flowing. That is why for some groups the bulb lit up and for some groups the bulb didn't
light up.
3.Letter C did not work because the wires were not touching the positive and negitiveside of the battery. That makes it an incomplete circuit.
4. some people got diffrent batterys like some batterys had rappers and some did not. The rappers are insulators for electricity to not flow.
JBS
1.I made my predictions by rembering what 4 parts need somthing to touch.
ReplyDelete2.none of the results surprised me because some of them did not have 4 parts touching and some we have done before.
3.E did not work because the battery holder was plastic that is an insolator so it can't get to the other side.
4.people got different results on c because the people who did not have wrapers it did work but the people who did it did not.
aeb
will it work?
ReplyDelete1.I made my predictions by cheking that the positve and negitive sides of the battary were conected and used my scheama.
2.Yes it did suprise me because some worked and some did not work on c.
3.It needed four conductors and insolators stoped us.
4. Peaple had it off and for people that had it off it worked and the ones that had it open did not work.
TJK
Will It Work
ReplyDelete1.I made my predictions by using my schema. I also looked for four places to see if it would work.
2.None of the results suprised me because I learned that all the four connections need to be touching exept when a light bulb is in a bulb holder.
3."E" did not work because it didn't touch the four connections.
4.People got different results for "C" because some people had a battery with out an insulator.
IAB
will it work?
ReplyDeletehow did you make your predictions?
i made my predictions by chekingthat the negative and pasitive side of the battury were tuching i also made shure it was a complete circut learn more latter by mk or mmk
mmk
This comment has been removed by the author.
ReplyDeleteWill it Work/Predictions
ReplyDelete1. How did you make your predicitions?
I made my predictions by making sure all four connections were made and used my schema from when we did it in science.
2. Did any of the results surprise you? Why or why not?
None of the results surprised me because I knew if all four connections were made it would work.
3. Why didn't "E" work?
It didn't work because the wire was only touching one side of the battery.
4. One group had the plastic off thier battery and since it was touching the metal it worked because metal is a conductor.
ICF
Will It Work-predictions?
ReplyDelete1.How did you make your prediction ? I made my prediction by checking to see 4 sides were touching . I also used schema.
2.Did any of the results suprized you ? I was suprized that some people got "C"to work probuly because it didn't have a conductor.
3."E"did not work because all four conection weren't conected .
4.Because some people didn't have that plastic thing on it.
1. how did you make your pridictions.
ReplyDeleteI looked for 4 conections . I looked for a posotive and negative conection
2.did any of the results suprize you .
none of the results suprized me because I got them all corect.
3. why did e not work
it did not have a posotive conection.
4. why did people get diferent results for c
some people did not have an insolator on.
#1. I made my pridiction by checking that the positive and negitive sides of the battery, were conected. I also used my schema from the past ecxperaments.
ReplyDelete#2. Nothing suprised me because all of the problems we've done before so I knew what to exspect.
#3. "E" didn't work because the circut was incomplet, and the wireswere only touching the poseive and negitive side of the battery.
#4. Some people got different resolts for letter "c" because some people had insalators on the battery and some people didn't.
G.B.S
WILL IT WORK
ReplyDelete2. did any resalts suprise you?
ReplyDeleteit suprised me on c' because i still thoght it wouldint be powerfull to go to the other side of the battury i thaght it was an un complete circut.
3.b did not work because it was not a complete circut. it also it did not tuch the negative side of the battury
4.in c it worked with out a rapper because with the wraperit wont go throgh to the other side to make it light up you need the wrapper oof.
mmk
1.I maked my perdictoinby cheing by going back in to my scheama if I had dun it befor.
ReplyDelete2. "C" spiris me because it wocked for some people not me.
3.
4.
1.how did you make your prediction
ReplyDeleteI made my predictions by ckecking that the positive and negative sides of the battery were connected. I also made sure that all four connections were made.
2.Did any of the results suprise you
Nothing suprised me when I was testing the ideas out because some things lit and some things didnt.
3.E didnt work because the wires were only connected to
1. I made my predictions by cheking to see if the questions were right and I also went back into my schema, and made my predictions.
ReplyDelete2. Yes the one that suprised me was letter E because some people got different awnsers because the insolater.
Will it Work
ReplyDelete1.I maked my perdictoinby cheing by going back in to my scheama if I had dun it befor.
2. "C" spiris me because it wocked for some people not me.
Will it Work-Predictions
ReplyDeleteHow did you make your predictions?
I made my predictions by checking the positive and negitive sides to seeif it will work.Also I used my schema.
Did any results suprise you? why? or why not?
I was suprised that our light bulb didn't light on letter c because it was not lighting and last time we used the plastic the light bulb lit for a second or two!
E didn't work because the wires from the moter only